Prima Equipment



Air Sampler


Air Sampler

Air Sampler that we offer works continuously for up to 10 hours between charging. If required, the Air Sampler can be used, while charging by 220 V AC mains supply. The screw arrangement allows variation of flow rates between 0.5 and 3.0 liters/ minute. A flow meter is mounted on the face of the box. The Air Sampler unit can be kept on a flat surface for stability at the breathing zone level of the worker to take TWA - TL V (8 hour) measurements. The Air Sampler is supplied with battery charger in a carrying case.

 

Model : PAS2


Features :

  • Low Cost
  • Portable and small
  • Rechargeable battery operated
  • Robust
  • 8 hour operation on one charge
  • Power On, Low Battery, Charging Indicators


Applications :

  • Threshold limit values - statutory requirements by sampling the breathing air, the short-term exposure limit can be determined. Otherwise using the sampler for an 8 hour shift the TWA – TLV value can be ascertained for the contaminant.
  • Dusts, Fumes, Mists- For collection of toxic dusts e.g. arsenic, cadmium, beryllium, carbon black, cobalt, copper, lead, manganese, nickel rhodium, silver or tin, the use of a filter is the simplest. Many oxides or metal fumes, produced by casting, welding or burning, may be collected on a filter for analysis.
  • Gases, Vapours and Solvents- Using the sampler, a convenient collecting method is by adsorption tubes or detector tubes suitable to the gases & vapours to be analysed odor deadsorbtion for chromatograph analysis of the adsorbent. Also for adsorption into a liquid contained in a bubbler for chemical analysis.